Pop Up Trundle Beds For Adults-how They Work: Step By Step Guides

Trundle beds are usually kept underneath the main bed and are considered extra beds. Adults mostly use the trundle bed because they have ideas on setting and troubleshooting any problems that arise when using the beds. They are usually smaller and lighter than normal beds. In addition to that, they are portable, unlike the main beds.

Trundle beds exist in different types. They are also made of different materials such as wood, plastic, metals, and strong plastic. Choose a trundle type that suits you and matches your style and preference. 

When using a trundle bed, ensure that you use a mattress that fits the bed.

How pop and trundle beds work

Pop-up trundles exist in various types and sizes. Each person chooses a trundle bed according to his or her likes. Firstly, pull out your lower bed from the rollers. Ensure that you pull the bed out until it is completely disconnected from the upper part of your bed. Carry out the activity slowly and gently to avoid damaging your trundle bed.

Secondly, lift the bed and straighten it to create a huge bed instead of sticking it on the surface. Prepare your bed by spreading all your beddings such as blankets, mattresses, bed sheets and pillows. Ensure that your trundle bed is kept on a raised surface and not on the floor. Finally, ensure that your mattress and the bed are comfortable for your use.

How to improve trundle bed comfortability

Step 1: collect at least two trundle beds

Place the two beds as close to each other as possible. Attach them strongly using zips. Ensure that each trundle bed leg is joined together. Ensure that they are firmly held together to prevent disconnection from taking place.

Place two mattresses on each trundle bed. Ensure that the beds fit correctly in the trundle beds. Avoid using the large mattress for small beds and vice versa.

Step 2: Use locking casters for the joined trundle bed

If your trundle bed does not have any locking caster, try visiting licensed hardware and buy one. Ensure the locking caster that you are buying meets your needs. The locking casters hold your beds firmly together hence preventing them from disconnecting.

Step 3: pop the trundle beds

The joined trundle beds need to be popped up. Popping up trundler beds ensures that they are raised above the ground. Ensure the beds are raised at the stated height, not high nor too low.

Step 4: Position a T-shaped piece of foam between the beds

After you have popped up your joined trundle beds, gently place a T-shaped piece between them. Ensure you place the piece with a strap around the two mattresses. The T-shaped piece enables you to convert the two trundle beds into a large bed with comfortable mattresses.

Step 5: Cover your mattresses with a large trundle mattress cover

Gently place a mattress with a zipped trundle mattress cover and ensure that every place is covered. The zipped mattress cover makes your bed more comfortable.

You might be interested to read also: How to Keep Mattress Topper From Sliding

Ways of closing and locking a trundle bed

First, try flipping the lever on the lock casters. Flipping causes lock casters to engage and lock the trundle bed wheels. Ensure you flip the lock casters carefully to avoid damaging the locks. If your lock casters are damaged, replace them with licensed hardware.

Further, if your lock caster fails to engage, check it for any possible damages and try to troubleshoot them or try repeating the process until the lock casters engage and lock the trundle wheels. Also, check your trundle wheels to ensure they are in good condition.

Secondly, you can lock your trundle bed using a rolling mechanism. Roll your trundle bed, gently push it in and out from beneath the principal bed, and then collect your latch and try locking your bed while ensuring that it is tucked inside. Before you use the rolling mechanism, ensure that your latches work properly and are in a good position.

Setting your trundle bed for use

Setting up your trundler bed allows you to use it without any difficulties. The following steps will help you set up your trundle bed properly.

Step 1: Open your trundle bed latch while following the manufacturer’s instructions

Set your latch to open up, ensuring that your lock caster is not locked. Secondly, you can pull your latch from the bed. Pulling the latch allows the locking caster to open. Finally, pushing your latch in a downward position since it locks your lock caster and keeps it in position.

Step 2: Locate your bed handle and slowly pull it

Follow the manufacturer’s instructions on using your bed handle to pull the bed towards your position. Grasp your bed handle using your hand, and then pull the bed gently towards your position. Fast and quick pulling of the handle can separate the handle from the bed. Also, pulling can damage your bed handle, and you will be required to repair or replace the handle.

Step 3: Use the brakes to lock the caster in place

Once your trundle bed has been extended from the top bed to the bottom bed, apply the brakes to lock your bed by flipping the lever.

Step 4: Spread your trundle bed

Bring all your bedding, such as blankets, pillows, mattress and mattress cover. Spread your bed correctly while following the steps of how to spread a trundle bed. Check your trundle bed’s status to identify any problems associated, whether with your bed, latch, handle and the lock casters.

Frequently asked questions: 

• How can I pop up my trundle bed?

Popping your trundle bed raises it to some height as the top bed. you can pop up your trundle bed by using the following steps.

Step 1: Remove your bed from the main bed

Pull your trundle bed slowly from underneath the main bed. Ensure you pull it gently to avoid damaging both the main bed and the trundle bed.

Step 2: Open the bed latches and release them

Locate the bed latches and gently release them. They are mostly placed at the sides of your bed.

Step 3: Check bed legs and try to obtain the metal legs attached to the bed

Using your latch to locate the metal legs and try unlocking them using either a button or lock caster.

Step 4: Pull the bed latch to pop your bed

After your bed has been raised at the desired position, use the latch and firmly lock up your trundle bed. Beds with an automatic mechanism for locking the bed do not require the latch method since they automatically lock the bed once it has been raised.

• How can I lower my trundle bed?

You can lower your trundle bed by reversing the method you used to pop up the bed. the steps include:

1. First, open your latches and unlock them, making the bed frame collapse.
2. Narrow the bed legs slowly until the bed frame is near the surface. Ensure that nothing gets into the frame while narrowing the frame.
3. Close the bed latches and return them under the principle bed.
4. Store your trundle bed correctly and engage the latches to complete the process.

Conclusion

Trundle beds work best when they are joined together to increase comfortability. This article shows how a trundle bed can be set, popped up, and even lowered back. Luckily, you can handle your trundle bed without involving an expert. The steps on how to handle the trundle beds are simple and easy to apply.